English version
           Sales department

New positions in our product range: Steel Sheet Art. 09G2S 2 mm
Riffled sheet 10mm
Galvanized steel sheet 2.5 mm
Galvanized steel sheet 1.2 mm
Galvanized wire 1.8 mm
Galvanized wire 2 mm
Galvanized wire 2.5 mm
Galvanized wire 3 mm
Galvanized wire 4 mm
Galvanized wire 6 mm

Ваш заказ
В корзине 0 товара

Арматура А500С - prices updated 28.11.2018 to 8:59

Арматура А500С is available in our various branches, you can choose the branch you need, the type and size of products and order online:

Presents the actual prices for metal. Арматура А500С is available in our various branches, you can choose the branch you need, the type and size of products and order online. Attention Prices are subject to prepayment! There is a surcharge for a batch of less than 1 ton, more details from the manager.

Select branch Select product Name Select size
Product Name Size Length Other Weight
1 PC/kg.
On stock
1 PC
1 - 5 tons
Price от
5 - 15 tons
> 15 tons
Товаров нет


Арматура А500С - техническая информация:

Rebar A500C

View price - structural rebar

Strength steel grade is according to СТО АСЧМ 7-93 and GOST R 52544 2006 and is used for reinforcement of concrete structures. The periodic section of the steel grade A500C has at least two rows of transverse edges, which are crescent-shaped, and are not connected to longitudinal edges. This is hot rolled without further processing or heat-treated in the rolling stream.

Rolled stock bar of a periodic section from reinforcing steel СТО АСЧМ 7-93

This standard applies to rods of a periodic section intended for the reinforcement of concrete structures and rods of non-stressed rebar of prestressed RC structures. The bars of the reinforcing steel according to the СТО АСЧМ 7-93 can be:

- гhot rolled without further processing
- thermo-mechanically strengthened in the rolling flow
- mechanically hardened in cold condition

The rebar, depending on the mechanical properties, is made of following strength grades: A400C, A500S, A600C.

Rebar table. Range of Rebars according the СТО АСЧМ 7-93 standard, nominal diameters of profiles, cross-sectional area.
Rebar12 weight per 1 meter. rebar a500C weight

Profile number, nominal diameter of Rebar , dн

Cross-sectional area, mm2

Weight 1 meter, kg

Rebar with a diameter of 6 mm



Rebar with a diameter of 8 mm



Rebar 10 a500s



Rebar 12 a500s, rebar weight 12 mm



Rebar 14 a500s









Rebar 20 diameter






















Rebar A500S GOST R 52544 2006 is manufactured with a nominal diameter:

- up to 6 mm - in coils
- from 6 to 12 mm - in coils or rods
- from 14 mm and above - in bars.

Bars of measured length - in the range of 6 to 12 m, unmeasured - 6 - 12 m. In a batch of bars of unmeasured length, bars of from 3 to 6 m are allowed in the amount of 7% of the mass of the batch.

The nominal diameters, a500 range of rebar, the cross-sectional area, the mass of a meter of rolled metal are approximately the same as in the standard СТО АСЧМ 7-93.

Reinforced thermo-mechanically reinforced rolling in a rolling stream GOST R 52544-2006

This standard applies to the welded reinforcement bar of a periodic section of steel grades A500C and B500C, which is intended for the reinforcement of concrete structures. The periodic section of such rolled products should have at least two rows of transverse ribs having a crescent shape and not connecting with longitudinal ribs.

According to the production method, reinforcing bar has following types of steel grades:

- A500C - hot-rolled without further processing or heat-treated in the rolling stream
- В500С - mechanically strengthened in a cold state (cold-deformed) The letter "C" means "welded."

The advantages of rebar steel grade B500C before steel grade A3 are:

- high plasticity,
- eliminates the possibility of destruction of the welded joint,
- maximum yield strength and design resistance, which allow 20% savings in steel,
- low production costs.

Rebar A400 and A500 differences. Rebar a3 (a400) and a500s

Until recently, in Russia, rebar of a periodic section of steel grade A400 (A-III) is mainly used, in particular steel grades 35ГС and 25Г2С, which are restrictedly welded. For steel 35ГС, arc welding of Rebar crosswise is forbidden, but unfortunately, it is still used everywhere, Арматура А500Сwhich often leads to serious accidents of reinforced concrete structures. In the construction of buildings made of monolithic reinforced concrete using the 35ГС steel grade, contact arc and other welds do not give good ductility, such compounds do not withstand bending. It is necessary to completely abandon welding and take significant reserves in the cross section of the rebar, because there is a danger of welding arc tacks of the rebar, and control over the reinforcement works and the quality of the rebar is difficult to ensure.

The Russian Standardization Association, together with the Gosstroy of Russia, developed a new standard СТО АСЧМ 7-93, prescribing mechanical properties, chemical composition and other requirements for structural rebar A500C. In accordance with these requirements, A500C Rebars are produced thermo-mechanically hardened, hot-rolled with microalloying, or cold-deformed. In reinforcement steel of steel grade A500C, the longitudinal ribs on the rods are not necessary, and the transverse protrusions (ribs) are crescent-shaped. The transverse protrusions should not be connected with the longitudinal.

The chemical composition of A500C steel grade rebars contains less doping substances, which simplifies production and reduces the cost of products without a significant reduction in performance properties. Requirements for structural rebar GOST 5781 82 are more stringent compared with the standard СТО АСЧМ 7-93.

By analyzing specific objects of monolithic construction, when replacing the A400 steel grade with the A500C steel grade, the reinforcement of the walls and floors of the bearing reinforced concrete frame of the building is reduced compared to the original design solution. Jointing of Rebars of different diameters: the use of the A500C ensured a reduction in the diameter of the rebar used, the simplification of the butt joining of the rods, and the effective use of the arc welding for the docking of the rods. As a result, the consumption of rebar decreases by 20–25% without increasing the cost of it, the quality of concreting improves due to a decrease in the saturation of the cross section of the rebar columns. On average, the use of steel grade A500C instead of steel grade A400 saves about 10% of the working reinforcement.

Produce A500C Rebar: OAO West-Siberian Metallurgical Plant, OAO Severstal, PJSC ArcelorMittal Kryvyi Rih, OOO TD Belorussky Metallurgical Works, OOO Abinsk Electric Steel Works Ltd, Moldavian Metallurgical Works SZAO, OAO Nizhneserginsky Hardware-Metallurgical , OOO Novorosmetall, OAO Oskolsky Electrometallurgical Plant.

Buy a500c Rebar

You can buy all types of rebars from us from the warehouses of branches, warehouses of the Moscow region or directly from the factory. We provide services for cutting, delivery and assembly of Rebar. Availability, gauge, weight and Rebar A500 price, Rebar diameter 12 price, Rebar diameter 10 price, the price rebar diameter of 14 you can see on the site. For more information on the cost per meter, specify the weight of the piece and calculate the quantity, draw up an invoice and make a request, clarify payment options and request a certificate for the metal received - please contact the manager by calling him:

(8452) 57-00-18,  e-mail: korneev@metallotorg.ru

Арматура А500С - look prices>>