Print version |
ROLLED STOCK
~ CONSTRUCTION REBARS
AO Metallotorg sells steel reinforcing bars (rebars) for construction mainly used as a tension device in reinforced concrete and reinforced masonry structures
~ I-BEAM
Beam. I-beams (also known as H-beams) are a standard profile of structural elements of black rolled steel having a cross section close in shape to the letter “H”. I-beam is stronger than square-shaped beam of similar cross-sectional area.
~ CHANNEL BAR
Structural metal channel is one of the most popular types of rolled stock products, used as basis in the supporting structure for any construction and has a U-shaped section (also known as U-iron). This is a strong and lightweight structural profile capable of withstanding high lateral loads, which was a great advantage in the construction of objects and structures that require increased strength, reliability and durability.
~ STEEL PIPE
A round steel pipe is a hollow product of a cylindrical shape, which has a greater length, as compared with the section. Carbon steel, alloyed steel and stainless steel are used to make this product.
~ SHAPED PIPE
The shaped steel pipe is a steel product of square, rectangular, oval and other section other than round.
~ STEEL SHEET
In conformity to requirements of GOST 16523-97 rolled sheets are produced of ordinary quality carbon steel, and high-quality carbon steel, 500 mm wide and more, thickness up to 3.9 mm inclusive.
~ RAILWAY STEEL RAIL
Did you know that the rails were invented by the ancient Romans? The first rails were two wooden beams laid parallel to wooden sleepers with a forged steel strip fixed on top.
~ ROUND BAR
Cold-rolled or cold-drawn round bar (also known as rod) is a calibrated metal-roll that has a more accurate diameter. It is made according to GOST 7417-75 standard with a diameter of from 3 to 100 mm, smelted in a special way and also processed by the method of cold drawing.
~ FORGINGS
A forged piece is a metal blank of a round or a square shape (forged square) or a piece in the form of a strip, bandage, shafts, rings. Such a blank forging requires further processing.
~ STEEL ANGLE BAR
Steel angle or rolled steel angle is a high-quality L-shaped long product made of carbon and low-alloy steel.
~ HEXAGONAL BAR
A hexagonal bar (also known as hex or hexagon) is a metal-roll, forming a regular hexagon in cross section. Steel hexagonal bar is produced from carbon steel, alloyed steel, high-alloyed steel and tool steels.
~ WIRE MESH
Wire mesh is woven by interlaced or welded steel bars or wire of a certain cross section. Metal mesh is used in building and construction as a reinforcing material for the manufacture of concrete products, concrete screeds etc...
~ SQUARE BAR
Square bar metals are long products, having an equilateral quadrangular cross section without a hollow space inside.
~ METAL STRIP
Steel strip or skelp (sometimes pronounced as scelp) is a steel that is rolled or forged into narrow strips and ready to be made into pipe or tubing having a certain length and width according to the classification.
~ STEEL WIRE
Steel wire is a metal product, mainly round, but may be square, oval and other cross-section, with the length of the product exceeding the diameter of the cross-section.